CC-200 UV Light-Curing Conveyor

30-cm Conveyor System with Multiple Lamp and Part Clearance Options

The CC-200 conveyor is designed for curing UV light-curable adhesives, resins, inks, and coatings. These 30 cm-wide conveyors can be outfitted with up to two FE-225 emitters, four 5000-EC lamps or up to two 15-centimeter microwave lamps. They offer complete shielding from UV light and ensure consistent cure times. The lamp options allow for matching intensity requirements to minimize operating costs. Standard height clearance is 10 cm; optional risers increase clearance to either 15 or 25 cm.

Choosing the Right Lamp(s)

CC-200 conveyors can be equipped with FE-225 emitters, 5000-EC lamps or F300 lamps.

5000-EC Lamps

These lamps provide moderate intensity (~200 mW/cm²) over a 6″ x 6″ (approximate) curing area. Their 400-Watt auto-switching power supplies accept 90 to 264 Volts AC and 47 to 63 Hz. With normal use, 5000-EC bulbs will retain approximately 90% of their original intensity after 1,000 hours. 5000-EC lamps are recommended for small-to-medium throughput bonding applications. For faster or more tack-free cures, F300 lamps are recommended.

Features

CC-200 – Features – Cure Time — Controlled and consistent cure times

CC-200 – Features – UV Shielding — Complete UV shielding

CC-200 conveyors can be equipped with one, two, or four 5000-EC lamps as shown in the diagrams below.


One 5000-EC lamp center mounted 6" wide single exposure	Two 5000-EC lamps center mounted 6" wide double exposure	Two 5000-EC lamps full-width mounted 12" wide single exposure	Four 5000-EC lamps full-width mounted 12" wide double exposure

F300 Lamps

These lamps provide the highest intensity (~2,500 mW/cm2) over a 1" x 6" curing area. F300 lamps require 220/230 Volts AC. With normal use, F300 lamps retain 80% of their intensity up to 5000 hours. F300 lamps are recommended for most coating, potting, and gasketing applications and all high throughput applications.

CC-200 conveyors can be equipped with one or two F300 lamps as shown in the diagrams below.

FE-225 Emitters

These emitters provide high intensity (~2,000 mW/cm2) over a 5" x 5" curing area. FE-225 emitters require 100-240 Volts AC. FE-225 emitters are recommended for most coating, potting, and gasketing applications and all high throughput applications. CC-200 conveyors can be equipped with one or two FE-225 emitters as shown in the diagrams below.

One center-mounted F300 6 inch wide single exposure

Two full-width mounted F300s 2 inch wide single exposure

One center-mounted FE-225 5 inch wide single exposure

Two center-mounted FE-225s 5 inch wide double exposure

One center-mounted F300 6" wide single exposure

Two full-width mounted F300s 2" wide single exposure

One center-mounted FE-225 5" wide single exposure

Two center-mounted FE-225s 5" wide double exposure

Specifications

	5000-EC Lamps				F300 Lamps		FE-225 Emitters
	5000-EC Modular (Silver)				F-300 D	F-300 H	FE-225-E 365 nm	FE-225-E 385 nm	FE-225-E 405 nm
Base Conveyor Part Number	86101				86102		86101 / 86102
Cradle Kit Part Number	86105				86106		86107
Lamp Part Number	38100				36402-C	43441-C	86611	86612	86613
Amperage	2A				15A		7A
Belt Width	30 cm				30 cm		30 cm
Number of Lamps	1*	2*	2	4	1 or 2		1 or 2	1 or 2	1 or 2
Lamp Orientation CM = Center Mounted FW = Full Width	CM		FW		CM	FW	CM
Width of Illuminated Area	15 cm		30 cm		15 cm	30 cm	12.7 / 25.4 cm
Maximum UVA Intensity (320-390 nm), mW/cm²	200				2,500		1,700	2,100	2,700
Shipping Weight with Crates (lbs. [kg])	390 [177]	410 [186]		450 [204]	475 [216]	580 [263]	N/A
Belt Speeds (feet per minute)	1-32 fpm				1-32 fpm		1-32 fpm
Voltage (VAC)	220V				220V		100-240V
Conveyor Dimensions (L x H x W)	150 cm x 100 cm x 89 cm
Replacement Bulbs
Metal Halide (Standard) 38560	✓	✓	✓	✓
Mercury 36970**	✓	✓	✓	✓
“D” Bulb (Standard) 36399					✓
“H” Bulb 36441**						✓
* These conveyors have center-mounted lamps and are supplied with removable guides to channel parts into middle 15 cm of conveyor. ** These bulbs are primarily designed for curing UV inks and cationic epoxies.

Configuring a CC-200 conveyor to meet your needs.
1. Choose the part number for the base conveyor and cradle kit configuration.
2. Select matching emitters and lamps based on the number of heads and the wavelength for the application.

Replacement Parts & Accessories

Accessories
Risers Kit 2" *	Pair	39218
Risers Kit 6" *	Pair	39280
Guides for 6" Curing	1	39277
Transportation Cart	1	39215
ACCU-CAL™ 160 Radiometer	1	41590
Replacement Parts
Acrylic Tunnel Shield	1	39205
Tunnel Light Curtain	1	39207
Replacement Belt	1	39134
* Available on new conveyors only and installed at the factory.

Resource Library