Tube Assembly - Hanarey 瀚纳瑞

UV and Visible Light Curing Adhesives for Bonding Tube Sets & Fittings

Hanarey adhesives for tube sets and fittings have been formulated to provide solvent-free and cost-saving assembly solutions to medical device manufacturers. They cure within seconds under exposure to UV and visible light.

These products are capable of bonding similar and dissimilar substrates and compatible with gamma, EtO, and E-Beam sterilization.

Cure using LED or UV/Visible light

ico_2-4-4_a — Secondary heat-cure capability for shadow areas

ico_2-4-4_c — Single component, no mixing

ico_2-4-4_e — Compatible with gamma, EtO, and E-Beam sterilization

Product Number	Features/Applications	Nominal Viscosity, cP	Durometer Hardness	Tensile at Break, psi	Elongation at Break, %
CSA4545-1	Plastic bonding, needle bonding, airway management device assembly, tube assembly No fluorescing Designed for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance	80~140	D65~D75	2,538	149
CSA4545-3	Plastic bonding, needle bonding, airway management device assembly, tube assembly No fluorescing Designed for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance	240~360	D55~75	2,596	180
CSA4545-7	Plastic bonding, needle bonding, airway management device assembly, tube assembly No fluorescing Designed for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance	560~840	D65~75	2,161	176
CSA5185 (testing)	Low viscosity, fast curing, with high flexibility An optimal choice when bonding plasticized PVC, TPEs, and thermoset rubbers	550	D60	3,300	23
CSA5187	Medium viscosity, fast curing, with high flexibility An optimal choice when bonding plasticized PVC, TPEs, and thermoset rubbers High adhesion to rigid substrates such as polycarbonate, ABS, acrylic, HDPE (pre-treatment required), PP (pre-treatment required)	160~280	D45~D70	2,116	220.67
Dymax Materials	Master distributor for Dymax tube assembly materials

Product Number

Features/Applications

Nominal Viscosity, cP

Durometer Hardness

Tensile at Break, psi

Elongation at Break, %

CSA4545-1

Plastic bonding, needle bonding, airway management device assembly, tube assembly
No fluorescing
Designed for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance

80~140

D65~D75

2,538

149

CSA4545-3

Plastic bonding, needle bonding, airway management device assembly, tube assembly
No fluorescing
Designed for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance

240~360

D55~75

2,596

180

CSA4545-7

Plastic bonding, needle bonding, airway management device assembly, tube assembly
No fluorescing
Designed for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance

560~840

D65~75

2,161

176

CSA5185 (testing)

Low viscosity, fast curing, with high flexibility
An optimal choice when bonding plasticized PVC, TPEs, and thermoset rubbers

550

D60

3,300

CSA5187

Medium viscosity, fast curing, with high flexibility
An optimal choice when bonding plasticized PVC, TPEs, and thermoset rubbers
High adhesion to rigid substrates such as polycarbonate, ABS, acrylic, HDPE (pre-treatment
required), PP (pre-treatment required)

160~280

D45~D70

2,116

220.67

Dymax Materials

Master distributor for Dymax tube assembly materials

UV and Visible Light Curing Adhesives for Bonding Tube Sets & Fittings

Features

Products